Call us Today 97227 07737

SUCTION STRAINERS

  • Reusable Stainless steel 100 mesh standard. Filtration 149 microns.
  • Aluminium die cast nut
  • Continuous Bonding.
  • Max. Working temp 80° c.
  • Suitable for hydraulic/mineral oil

BREATHER PLUGS

  • Special polyamide techno polymer or orange marked “OLI” black threaded Connector, Resistant to solvents, Oil, Greases and other Chemical agents. Flat NBR synthetic packing ring.
  • Maximum temperature 80° C.
  • Type TBP with “Foam” air filter, air filtration 40 Microns.
  • TBP Breather Plugs come complete with splash guard device that prevents oil loss / Size: 1/4” to 1” BSP.
  • MS Type/ Brass Type Size: 1/4” to 1 1/2” BSP.

OIL LEVEL INDICATOR

  • ‘O’ RingType Counstruction.
  • FACE TYPE : 3″,4”, 5″,6” & 10” between bolt centers.
  • KNOB TYPE : 1/4″ to 2″BSP(M) connection.
  • L-Type : Brass 2” to 20” Height Available.
  • Maximum Temp. 80° c.
  • Suitable for mineral / petroleum based oils for polycarbonet.

FILLER BRETHER & TANK BRETHER

  • Chrome plated Steel Cap.Vents underneath.
  • Filtratration 40 microns standard/optional 10 & 3 microns.
  • Metal or plastic strainer standard.
  • Air Flow to 25 CFM (750 LPM)
  • Hardware Includes Gaskets & (05 x 15) Screws.

PIPE CLAMP (PCS/PCD/PCH)

  • IFP Clamps acoording to DIN 3015.
  • High density polythene mould and mild steel plates
    construction.
  • Heavy & light duty.
  • Range 6 mm to 324 mm pipe.

GEAR COUPLING

  • Material Steel hub & high graded plastic material Sleeve.
  • Application to all range of hydraulic equipment and in the transmission market.
  • Maintenance free no lubrication Crowned – tooth
  • Form gears permitting axial and angular misalignment
  • Cost effective, easy to assemble
  • Compact and streamlined available in five sizes to suit 1 to 75 HP maximum
  • Maximum permissible angular misalignment 1.5 degrees. Ensure that the coupling hubs easily fit on shaft.
  • Do not use undue force.
  • Maintain gap between hubs as shown in sketch.
  • Use grub screws to locate gear hubs on their respective shaft.
  • For Shock load application use the following formula
MODEL IFP-19 IFP-28 IFP-38 IFP-48 IFP-65
PILOT BORE(mm) 07 10 12 15 20
SUITABLE MOTOR HP 0.25-1 1-5 5-10 10-30 40-60

DIMENTION

M-19

MM

M-28

MM

M-38

MM

M-48

MM

M-65

MM

A 53.0 81 84 106 146
B 49.0 67 85 103.5 138.5
C 45.0 64 67 79 111
D 30.5 45 59 68 96
E 8.0 17 17 27 35
F 25.0 40 40 50 70
G Pilot bore dia 10.0 10 12 12 18
Teeth 24.0 34 44 50 54

BELL HOUSING

  • By using bell housings motor and pump shat are aligned to
    each other optimally.
  • Material aluminium low weight with sufficient strength.
  • Horizontal assembly possible with foot cum flange motor.
  • Aluminium bell housing also reduces the noise generation considerably.

INLINE FILTER

  • Aluminum die cast construction.
  • 3 basic models – flows to 150 lpm. (Inline)
  • By pass standard 1 bar.
  • Working pressure to 20 bar.
  • Test 30 bar / burst 40 bar
  • Max temp. limited To 80° c.
  • Suitable for mineral / petroleum based oils.
Model Port ‘A’ BSPP B C D E G H J Y
2 OFF
WT
KGS
HFR – 05 1/2″ 66 149 38 88 21 44 104.5 M 8x 1.25 1.0
HFR – 10 3/4″
1″
84 181 44 113 24 50.5 126 M 8x 1.25 1.6
HFR – 10 1-1/4″
1-1/2″
122 288 57 148.5 35 66 216 M 10x 1.5 3.8

RETURN LINE FILTER

  • Direct Tank Mounting
  • Pressure – Max. 10 Bar/Test 20 Bar / Burst 25 Bar
  • All Aluminium Die cast Construction
  • 4 – Sizes Flows to 175 LPM
  • By Pass Standards 1 Bar
  • Elements Replaceable through Cover
  • Suitable for Mineral / Petroleum Based Oils
  • Max temp. limited To 80° c.
Model Port
‘A’ BSPP
Port
‘B’ BSPP
Tank Cut Out B C D E Port
‘F’ BSPP
H I L N P WT
KGS
SM 2 – 04 1/2″ 64 60 15 62 1/2″ 51 28 22 6.5 90 0.7
SM 2 – 06 3/4″ 86 75 15 81 3/4″ 69 34 26 7.0 112 1.4
SM 2 – 06 / 08 1″ 86 104 15 81 3/4″ 68 37 32 7.0 112 1.5
SM 2 – 10 1/4″ 107 173 37 107 Hose 42mm 88 44 35 10.5 148 4.3

HYDRAULIC CYLINDERS

  • Manufacturing standard & custom made hydraulic cylinders.
  • Flange/Trunnion/Clevis/Leg Mounting Cylinder.
  • Single/Double acting.
  • Tie rod/Welded Const./Lift/ Double rod/Hose burst hyd. cylinders.
  • Bore diametar 25 mm to 800 mm.
  • Stroke up to 6000 mm
  • working pressure up to 700 bar.

MANIFOLD BLOCK

  • Manifold block for any type custom built system are available. Any type of subplates for dc valve-pre, relief valve And flow control valve.

 

MODEL CONNECTIONS
NG-06 1/4″, 3/8″ & 1/2″
NG-10 1/4″, 3/8″ & 1/2″
NG-16 1/2″ & 3/4″
NG-20 3/4″ & 1

DOWTY SEALS

  • Bonded / Dowty Seals Are Cost Effective Solution For Bolt / Thread Sealing.
  • Versatile, Applicable To All Threaded Bolts, Studs and Clearance Holes.
  • Sealing Washers Are Available For Metric Whitworth And BSP Threads.
  • Bonded / Dowty Seals Are Available In A Large Range Of Elastomers And Metals Available
  • Wide Temperature Range.
  • Reliable High And Low Pressure Sealing
  • Metal Washer Prevents Over — Compression And Extrusion.
  • Usable For Overhead Installation.
  • Can Be Automatically Installed.
  • Seals To Plane Surfaces With No Housing For The Sealing Lip.
  • Visible From The Outside.
  • No Sweating.
  • Bonded / Dowty Seals Are Re — Usable.
  • Metal Washer With Vulcanized Sealing Body Of Rubber For Sealing Of Bolt Heads And Flanges.
  • Bonded / Dowty Seals Are Available In All European Thread Sizes.

COPPER WASHER

BALL VALVE(2 WAY/3 WAY) (C-TYPE,L-TYPE)

  • Material-Carbon Steel/Stainless Steel
  • Ball Seal-POM/PEEK/PTEE/GFT/CFT
  • Body & Stem Seals – PTFE/NBR/FPM
  • Temp. 80° C

INLINE CHECK VALVE/SUBPLATE TYPE

  • Tube connection check valve RHD,RHV & RHZ available in 6mm to 42mm.
  • Steel poppet type construction.
  • Prevents flow in reverse direction.
  • Max Working Pressure 350 bar.
  • Choice of cracking pressure 0.5 to 15 bar.

FLOW CONTROL & CHECK VALVE

  • Integrated check valves allows reversed free flow from outlet
    to inlet.
  • Max. Working pressure 350 bar.
  • Type: Threaded/Modular.

DIRECTION CONTROL VALVE

  • Completely encapsulated control mechanism for protection against dirt.
  • Five chamber design.
  • Wide variety of spools available in subplate / threaded model.
  • Spool available A, C, D, E, G, H, J.

NEEDLE VALVE/ SHUTT OFF VALVE

  • MS & SS bar stock, screwed bonnet, metal to metal construction.
  • Variety range of end connection include 1/4” to 1” BSP.
  • Maximum Pressure 350 bar.

HYDRAULIC PUMP

  • Product Range also Available in 4000psi working
    pressure in IP series
  • Tandem, triple and four combination pump also available
    on request.
  • Pump 0P , 1P, 2P, 3P, Also available.
  • Max. Working pressure 100 to 207 bar.

HYDRAULIC VALVE

4/3 and 4/2 Directional Valves with wet pin DC or AC solenoids, Type 4WE 6 or 10

  • The 4WE 6 or 10 directional valves are solenoid operated
    directional spool valves.
  • They control the start, stop and direction of flow.
  • Solenoid coil can be rotated through 90
  • All valves can be changed from AC to Dc or DC to AC by
    changing only.

HYDRAULIC VALVE PILOT OPERATED

4/3 and 4/3 Way Directional Valves Pilot Operated Rype 4WEH.
Externally Pilot Operated Type 4WH.

  • There are four different pilot controI types to controI main
    valve’s spool moving accurately.
  • It used to control the start, stop and direction of a fluid flow.
  • The Shifting time also can be adjusted by assembling
    throttle and check valve.

RV Pressure Relief Valves/Direct Operated Pressure Relief Valve

  • Max.Pressure: 700 bar
  • The valve can control pressure value of one oit road in system.
  • Manifold pressure can come true by adjustment handle.
  • There are three kinds of pressure adjustment range.
  • Max. Flow Size: 02 up to 35L/min & Size 03 upto 70L/min.

HYDRAULIC PRESSURE GAUGE

  • Model : Battom Connection Back Connection,
  • Type : Glycerin
  • Capacity : 0 to 400kg (Bar)
  • Connection : 1/4” to 3/8” BSP
  • Application : Determine of system pressure.

HOSE PIPE

  • Hydraulic High Pressure/ Low Pressure Hose
  • Hyd. house for industrial & earth moving application.
  • SAE Type Flanges fitting in high & low pressure.
  • Size – 1/4” to 2” Hose Available.

HYDRAULIC POWER PACK

  • Manufacturing Standard & Custom Made Hydraulic Power Pack
    Units Up To 500 Bar Working Pressure.
  • Applications For Deep Draw Press, Machine Tools, Press Break, Plywood Press, Steel Plants, Cement Plants, Foundry Furnace, Sugar Factories, Plastic Injection Molding Machines, Textile Machineries, Rolling Mills, Power Plant, Etc.

SEAMLESS TUBES

  • Seamless Tube range 6 mm to 50 mm
  • minimum 2000 psi pressure.

HYDRAULIC FITTINGS

NOMENCLATURE

  • IFP fittings are made in these two series to Accommodate all type of service requirements And system characteristics and are produced to DIN standard 2353.
  • Series L:For compressed air hydraulic return lines, propane, fuel heating, automotive industry, small type refrigeration equipment device, construction, plastic piping, etc
  • Series S:For heavy-duty, machinery, ship building, mining, chemical industry.large capacity refrigeration plant, compressed air lines,etc.